Filters
Shop Benchtools For Electronic Assembly from Metcal
Metcal provides advanced technology tools helpful in hand soldering, convection rework, fume extraction, and fluid dispensing processes. With the introduction of SmartHeat Systems, Metcal changed the rework definition and has set new standards for designs and ease-of-use. The products are designed to provide flexibility, reliability, ROI, and high performance.
The Metcal Soldering Systems provide users with a wide range of product choices such as:
- Desoldering Irons to provide a high-quality service while performing desoldering tasks.
- Desoldering Stations for adjusting heat settings and removing the solder.
- Desoldering Tips to remove components, for PCB repair, and it doesn’t require constant maintenance as well.
- Dispensing Systems for delivering precise amounts of liquid into a microplate or tube.
- Desoldering Nozzles for removing solder and also when you need to desolder components from a circuit board.
- ESD Safe Vacuum Cleaners to reduce any chances of damaging components while cleaning devices and prevent electronic equipment interruptions and failures.
- Fume Extraction Systems with low noise to pull fumes and particulate into a filtration system thus, cleaning the air.
- Hot Air Nozzles to work with thin pipes flexibly and with great ease.
- Iron and Pencil Stands to keep the hot soldering iron and other tools.
- Lead-Free Solder Irons to work with minimum possible problems. These irons do not wet well so you can get better lead spacing.
- Lead-Free Soldering Station is used as soldering tools and for soldering of PCB boards as well.
- PCB Vise to hold a printed circuit board and for making your work easier.
- Preheater to heat air before carrying out any other process and Hot Plate for transferring heat well.
- Tip Maintenance and Sponges to preserve the tip life and save your time.
Metcal is an expert manufacturer of benchtop solutions. It’s problem-solving, reliable, and flexible handy services have always been in demand in the soldering market. You can opt from the long list of available products by Metcal.
-
$29.60| /
metcal-sttc-198-chisel-bent-tip-1-16-for-mx-series-systems
MetcalThe Metcal STTC-198 Chisel Bent Tip 1/16" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Soldering I...
View full details$29.60| /Sale -
$29.60| /
metcal-sttc-147p-bevel-high-power-tip-1-32-for-mx-series-systems
MetcalThe Metcal STTC-147P Bevel High Power Tip 1/32" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Solde...
View full details$29.60| /Sale -
$30.80| /
metcal-sttc-044-conical-sharp-bent-tip-3-128-for-mx-series-systems
MetcalThe Metcal STTC-044 Conical Sharp Bent Tip 3/128" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Sol...
View full details$30.80| /Sale -
$29.60| /
metcal-sttc-038-chisel-soldering-tip
MetcalThe Metcal STTC-038 Chisel Tip provide a wide range of options for through-hole and SMD Rework. For use with the MX-500 and MX-5000 & MX-520...
View full details$29.60| /Sale -
$13.30| /
metcal-scv-ch50-extra-large-chisel-solder-tip-5-0mm-20-for-metcal-mfr-units-and-ps-900-stations
MetcalThe Metcal SCV-CH50 Extra Large Chisel Solder Tip is used in the popular MFR-1120 and the MFR-2220 Rework Systems. The SCV-CH50 offers SmartHeat...
View full details$13.30| /Sale -
$13.30| /
metcal-scv-ch20-chisel-solder-tip-2-0mm-07-for-metcal-mfr-units-and-ps-900-stations
MetcalThe Metcal SCV-CH20 Chisel Solder Tip is used in the popular MFR-1120 and the MFR-2220 Rework Systems. The SCV-CH20 offers SmartHeat® Technology...
View full details$13.30| /Sale -
$32.20| /
metcal-cvc-7ch0010s-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7CH0010S Soldering Cartridge is a 30-degree Chisel tip, 1.0mm x 9.1mm.Connection Validation Enabled700 SeriesEquivalent to STTC-125
$32.20| /Sale -
$43.50| /
metcal-cvc-8bv6018p-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-8BV6018P is a Soldering Cartridge for the CV-5200 Connection Validation Soldering Station. This is 1.8mm x 6mm Beveled 60 degree...
View full details$43.50| /Sale -
$13.30| /
metcal-sfv-ch18ar-chisel-soldering-tip-for-ps-mfr-solder-irons
MetcalThe Metcal SFV-CH18AR Chisel Soldering Tips are for use with the soldering tip hand-piece of the PS and MFR Platforms. They are recommended for ...
View full details$13.30| /Sale -
$13.30| /
metcal-scv-ch15ar-chisel-soldering-tip-for-ps-and-mfr-irons
MetcalThe Metcal SCV-CH15AR Chisel Soldering Tip is recommended for heavy duty applications. The second digit denotes substrate material (damage toler...
View full details$13.30| /Sale -
$21.40| /
metcal-sfv-drk50-knife-solder-tip-5-0mm-20-for-metcal-mfr-units-and-ps-900-stations
MetcalMetcal SFV-DRK50 Knife Solder Tip is used in the popular MFR-1120 and the MFR-2220 Rework Systems. The SFV-DRK50 offers SmartHeat® Technology th...
View full details$21.40| /Sale -
$13.30| /
metcal-sfv-cnl10-conical-long-solder-tip-1-0mm-04-for-metcal-mfr-units-and-ps-900-stations
MetcalThe Metcal SFV-CNL10 Conical Long Solder Tip is used in the popular MFR-1120 and the MFR-2220 Rework Systems. The SFV-CNL10 offers SmartHeat® Te...
View full details$13.30| /Sale -
$13.30| /
metcal-sfv-cn05-conical-solder-tip-0-5mm-02-for-metcal-mfr-units-and-ps-900-stations
MetcalThe Metcal SFV-CN05 Conical Solder Tip is used in the popular MFR-1120 and the MFR-2220 Rework Systems. The SFV-CN05 offers SmartHeat® Technolog...
View full details$13.30| /Sale -
$34.50| /
metcal-sttc-843-conical-sharp-tip-3-128-for-mx-series-systems
MetcalThe Metcal STTC-843 Conical Sharp Tip 3/128" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Solderin...
View full details$34.50| /Sale -
$81.10| /
metcal-sttc-1173p-knife-high-power-tip-5mm-for-mx-series-systems
MetcalThe Metcal STTC-1173P Knife High Power Tip 5mm tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Solder...
View full details$81.10| /Sale -
$30.80| /
metcal-sttc-099-chisel-bent-tip-3-64-for-mx-series-systems
MetcalThe Metcal STTC-099 Chisel Bent Tip 3/64" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Soldering I...
View full details$30.80| /Sale -
$67.60| /
metcal-smtc-106-surface-mount-removal-tip-soic-14
MetcalThe Metcal SMTC Series tips are for use with the MX-RM3E Soldering Iron Handpiece. Metcal SMTC-106 Features: Designed for reworking SMT Comp...
View full details$67.60| /Sale -
$21.40| /
metcal-scv-drk50-knife-solder-tip-5-0mm-20-for-metcal-mfr-units-and-ps-900-stations
MetcalMetcal SCV-DRK50 Knife Solder Tip is used in the popular MFR-1120 and the MFR-2220 Rework Systems. The SCV-DRK50 offers SmartHeat® Technology th...
View full details$21.40| /Sale -
$13.30| /
metcal-scv-cn05-conical-solder-tip-0-5mm-02-for-metcal-mfr-units-and-ps-900-stations
MetcalThe Metcal SCV-CN05 Conical Solder Tip is used in the popular MFR-1120 and the MFR-2220 Rework Systems. The SCV-CN05 offers SmartHeat® Technolog...
View full details$13.30| /Sale -
$14.50| /
metcal-gt6-hf6010s-hoof-solder-tip-1mm-x-16mm-60-degree
MetcalThe Metcal GT6-HF6010S Hoof solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$14.50| /Sale -
$19.60| /
metcal-sfp-ch15-chisel-cartridge-30-degrees-1-5mm-06
MetcalSFP-CH15 Chisel 30° 1.5mm x 10mm (.06" x .39") Features and Benefits: The SxP Cartridges are for use with the MFR-H1-SC soldering cartrid...
View full details$19.60| /Sale -
$43.50| /
metcal-cvc-8bv6018r-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7BV6018R Soldering Cartridge is a long reach, 60-degree bevel cartridge. It is 1.78mm x 14.2mmConnection Valiation Enabled800 Ser...
View full details$43.50| /Sale -
$23.70| /
metcal-ssc-746a-chisel-long-reach-soldering-cartridge-tip
MetcalThe Metcal SSC-746A Chisel Long Reach Soldering Cartridge Tips have a high power coil assembly that delivers additional power to demanding solde...
View full details$23.70| /Sale -
$20.20| /
metcal-ssc-626a-conical-sharp-bent-soldering-cartridge-tip
MetcalThe Metcal SSC-626A Conical Sharp Bent Soldering Cartridge Tips have a new, high power coil assembly that delivers additional power to demanding...
View full details$20.20| /Sale -
$20.20| /
metcal-ssc-701a-sharp-conical-soldering-tip-cartridge-1-00mm-for-mfr-systems
MetcalThe Metcal SSC-701A Soldering Tip Cartridge is a replacement for the MFR-H6-SCC and SP-HC1 Soldering Irons. Metcal SSC-701A Features and Benef...
View full details$20.20| /Sale -
$23.70| /
metcal-ssc-754a-sharp-bent-soldering-tip-cartridge-0-51mm-for-mfr-systems
MetcalThe Metcal SSC-754A Soldering Tip Cartridge is a replacement for the MFR-H6-SCC and SP-HC1 Soldering Irons. Metcal SSC-754A Features and Benef...
View full details$23.70| /Sale -
$199.00| /
metcal-tatc-604-blade-talon-cartridge-tips-2-81-600-series
MetcalTATC Tips for MX Talon Stations. Metcal's unique design means that a wide range of components can be removed by a small range of tips. You can r...
View full details$199.00| /Sale -
$34.50| /
metcal-sttc-042-long-reach-chisel-soldering-cartridge-tip
MetcalThe Metcal STTC-042 Long Reach Chisel Tips provide a wide range of options for through-hole and SMD Rework. For use with the MX-500 and MX-5000 ...
View full details$34.50| /Sale -
$60.20| /
metcal-smtc-1161-surface-mount-multi-lead-drag-solder-tip
MetcalThe Metcal SMTC Series tips are for use with the MX-RM3E Soldering Iron Handpiece. Metcal SMTC-1161 Features: Designed for reworking SMT Com...
View full details$60.20| /Sale -
$33.40| /
metcal-sfp-drh35-drag-hoof-cartridge-3-5mm-14-for-mfr-systems
MetcalThe Metcal SFP-DRH35 is a replacement soldering tip cartridge for the MFR-H1-SC and MFR-HSR Soldering Irons. OKI SFP Features and Benefits: ...
View full details$33.40| /Sale -
$33.40| /
metcal-sfp-drh05-drag-hoof-cartridge-0-5mm-02-for-mfr-systems
MetcalThe Metcal SFP-DRH05 is a replacement soldering tip cartridge for the MFR-H1-SC and MFR-HSR Soldering Irons. OKI SFP Features and Benefits: ...
View full details$33.40| /Sale -
$24.60| /
metcal-sfp-chb15-chisel-bent-cartridge-1-5mm-06-for-mfr-systems
MetcalThe Metcal SFP-CHB15 is a replacement soldering tip cartridge for the MFR-H1-SC and MFR-HSR Soldering Irons. Metcal SFP Features and Benefits: ...
View full details$24.60| /Sale -
$20.20| /
metcal-scv-drh20-conical-bevel-solder-tip-2-0mm-07-for-metcal-mfr-units-and-ps-900-stations
MetcalMetcal SCV-DRH20 Conical Bevel Solder Tip is used in the popular MFR-1120 and the MFR-2220 Rework Systems. The SCV-DRH20 offers SmartHeat® Techn...
View full details$20.20| /Sale -
$13.30| /
metcal-scv-cnl14-conical-long-reach-solder-tip-1-4mm-55-for-metcal-mfr-units-and-ps-900-stations
MetcalMetcal SCV-CNL14 Conical Long Reach Solder Tip is used in the popular MFR-1120 and the MFR-2220 Rework Systems. The SCV-CNL14 offers SmartHeat® ...
View full details$13.30| /Sale -
$55.90| /
metcal-rcp-sl2-mfr-rework-slot-cartridge-1206-chip-package
MetcalThe Rework Cartridges are used with the MFR-HSR Soldering & Rework Hand-piece for conduction rework of surface mount components. The geometr...
View full details$55.90| /Sale -
$38.90| /
metcal-gtc-ch0040s-chisel-cartridge-4mm-x-10mm-40-degree
MetcalThe Metcal GTC-CH0040S Chisel soldering cartridge is for use with the GT Series soldering stations and the GT-HP-T6C hand pieces
$38.90| /Sale -
$38.90| /
metcal-gtc-ch0032s-chisel-cartridge-3-2mm-x-10mm-40-degree
MetcalThe Metcal GTC-CH0032 Chisel cartridge is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$38.90| /Sale -
$38.90| /
metcal-gtc-ch0025s-chisel-cartridge-2-5mm-x-10mm-40-degree
MetcalThe Metcal GTC-CH0025S Chisel solder cartridge is for use with the GT Series soldering stations and the GT-HP-T6C hand piece.
$38.90| /Sale -
$38.90| /
metcal-gtc-ch0018s-chisel-cartridge-1-8mm-x-10mm-40-degree
MetcalThe Metcal GTC-CH0018S Chisel cartridge is for use with the GT Series soldering stations and the GT-HP-T6C hand pieces.
$38.90| /Sale -
$38.90| /
metcal-gtc-ch0014s-chisel-cartridge-1-4mm-x-10mm-40-degree
MetcalThe Metcal GTC-Ch0014S Chisel Cartridge is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$38.90| /Sale -
$38.90| /
metcal-gtc-ch0010s-chisel-cartridge-1mm-x-10mm-40-degree
MetcalThe Metcal GTC-CH0010S Chisel cartridge is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$38.90| /Sale -
$16.50| /
metcal-gt6-hf3025v-concave-bent-hoof-solder-tip-2-5mm-x-16mm-30-degree
MetcalThe Metcal GT6-HF3025V Concave Hoof Solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece.
$16.50| /Sale -
$16.50| /
metcal-gt6-hf6030v-concave-hoof-solder-tip-3mm-x-12mm-60-degree
MetcalThe Metcal GT6-HF6030V Concave Hoof Solder Tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece.
$16.50| /Sale -
$16.50| /
metcal-gt6-hf6020v-concave-hoof-solder-tip-2mm-x-12mm-60-degree
MetcalThe Metcal GT6-HF6020V Hoof Solder Tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$16.50| /Sale -
$16.50| /
metcal-gt6-hf6015v-concave-hoof-solder-tip-1-5mm-x-12mm-60-degree
MetcalThe Metcal GT6-HF6015V Hoof Solder Tip is for use with the GT Series stations and the GT-HP-T6C hand piece
$16.50| /Sale -
$16.50| /
metcal-gt6-hf6010v-concave-hoof-tip-1mm-x-12mm-60-degree
MetcalThe Metcal GT6-HF6010V Concave Hoof Tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$16.50| /Sale -
$14.50| /
metcal-gt6-hf6040s-hoof-solder-tip-4mm-x-16mm-60-degree
MetcalThe Metcal GT6-HF6040S Hoof soldering tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece.
$14.50| /Sale -
$14.50| /
metcal-gt6-hf6030s-hoof-solder-tip-3mm-x-16mm-60-degree
MetcalThe Metcal GT6-HF6030S Hoof solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$14.50| /Sale