Filters
Metcal
-
$8.50| /
Metcal GT4-CN1608R Conical Tip, Bent, Access 0.8mm x 16mm
MetcalThe Metcal GT4-CN1608R Conical Soldering Tip is for use with the GT Series Soldering Stations and the GT-HP-T4 Hand Piece.
$8.50| /Sale -
$12.10| /
metcal-900-ortc-orange-tip-cap-seal-syringe-between-applications
MetcalUse with 900 System Syringes to seal barrel between uses or to seal any valve. Fits all syringe sizes. Available in packs of 50. Made from Polyprop...
View full details$12.10| /Sale -
$29.70| /
metcal-920100-te-precision-te-pink-needle-20-guage-x-1-50-pk
MetcalThe TE Needle Series consist of a stainless-steel cannula with a double helix Polypropylene hub.This premier line of dispensing needles is burr-fre...
View full details$29.70| /Sale -
$35.60| /
metcal-93055-ww-piston-30-55cc-white-wiper-50-pk
MetcalSpread the pressure evenly across product, using a piston, for consistent dispensing of even high viscosity products. Wiper Pistons (white) provide...
View full details$35.60| /Sale -
$15.69| /
metcal-ac-bp-brass-pads-for-workstands-10-pk
MetcalThe Metcal AC-BP is a soft, coiled brass tip cleaner often preferred tip cleaning method that reduces the potential to introduce contaminants to th...
View full details$15.69| /Sale -
$9.19| /
metcal-ac-cp2-large-cartridge-removal-pad-for-mx-500-and-ps-stations
MetcalMetcal AC-CP2 is a large cartridge removal pad for the MX Series and PS series soldering stations.
$9.19| /Sale -
$11.81| /
metcal-ac-tc-p-desoldering-cartridge-tip-cleaner
MetcalThe Metcal AC-TC-P Tip Cleaner removes unwanted solder and flux build-up from desoldering tip.Set of 12 Rods Sizes 0.50mm - Pack of 12 sets
$11.81| /Sale -
$33.50| /
metcal-ac-y10-solder-tip-cleaning-sponge-with-center-hole-10-per-pack
MetcalThe Metcal AC-Y10 Solder Tip Cleaning Sponge with Center Hole can be used with OK International MFR iron stands
$33.50| /Sale -
$488.00| /
metcal-bh-1000-post-rail-board-holder-for-the-pct-1000
MetcalThe BH-1000 board holder consists of posts and rails and is a highly flexible system. It has two sets of post-rail assemblies (two posts, one rail ...
View full details$488.00| /Sale -
$675.00| /
metcal-bvx-101-portable-benchtop-fume-extraction-system
MetcalMetcal BVX-100 Series Fume Extraction Systems are powerful, but low noise units that need no external ducting or compressor. Simply move these ligh...
View full details$675.00| /Sale -
$940.50| /
metcal-bvx-200-kit-fume-extraction-filter-unit-with-2-flexible-arms-1-2m-long-pre-hepa-gas-filter
MetcalThe BVX-200 Series Fume Extraction Systems are revolutionary two-arm units that combine powerful fan performance with efficient filtration, quiet o...
View full details$940.50| /Sale -
$806.66| /
metcal-bvx-201-dual-station-fume-extraction-system
MetcalThe BVX-200 Series Fume Extraction Systems are revolutionary two-arm units that combine powerful fan performance with efficient filtration, quiet o...
View full details$806.66| /Sale -
$1,124.80| /
metcal-bvx-201-kit1-esd-safe-two-operator-fume-extraction-system
MetcalThe Metcal BVX-201-KIT1 is a two operator, PRE-HEPA-GAS volume extraction system with two BVX-ARM-K1 designed to be used adjacent to the workbenche...
View full details$1,124.80| /Sale -
$193.00| /
metcal-cv-h1-av-connection-validation-handpiece
MetcalThe Metcal CV-H1-AV Connection Validation is an advanced handpiece with integrated LED light and 6' cord. The LED light signals that a good solder...
View full details$193.00| /Sale -
$35.30| /
metcal-cvc-7bv6005a-cv-5200-series-soldering-cartridge
MetcalThe Metcal OK-CVC-7BV6005A Solder Cartridge is a Long Reach Access Bevel, 60-degree, 0.5mm X 14mm for use with the CV-5210 Connection Validation...
View full details$35.30| /Sale -
$43.50| /
metcal-cvc-7bv6018p-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7BV6018P is a Soldering Cartridge for the CV-5200 Connection Validation Soldering Station. This is 1.8mm x 6mm Beveled 60 degree...
View full details$43.50| /Sale -
$32.20| /
metcal-cvc-7bv6018r-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7BV6018R Soldering Cartridge is a long reach, 60-degree bevel cartridge. It is 1.78mm x 14.2mmConnection Valiation Enabled700 Se...
View full details$32.20| /Sale -
$32.20| /
metcal-cvc-7ch0010s-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7CH0010S Soldering Cartridge is a 30-degree Chisel tip, 1.0mm x 9.1mm.Connection Validation Enabled700 SeriesEquivalent to STTC-125
$32.20| /Sale -
$43.50| /
metcal-cvc-7ch0014p-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7CH0014P Soldering Cartridge is a 30-degree Chisel tip. It is 1.4mm x 6.0mm and has optimized geometry for best thermal performa...
View full details$43.50| /Sale -
$32.20| /
metcal-cvc-7ch0014s-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7CH0014S Soldering Cartridge is a 30-degree chisel tip, 1.5mm x 9.9mmConnection Validation Enabled700 SeriesEquivalent to STTC-138
$32.20| /Sale -
$32.20| /
metcal-cvc-7ch0015r-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7CH0015R Soldering Cartridge is a Reach Chisel Bent 30-degree tip, 1.5mm x 11.9mmConnection Validation Enabled700 SeriesEquivalen...
View full details$32.20| /Sale -
$47.20| /
metcal-cvc-7ch0018a-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7CH0018A Access Soldering Cartridge is a long reach chisel tip, 1.78mm x 16mmConnection Validation Enabled.700 SeriesEquivalent t...
View full details$47.20| /Sale -
$46.59| /
metcal-cvc-8bv6005a-cv-5200-series-soldering-cartridge
MetcalThe Metcal OK-CVC-8BV6005A Solder Cartridge is a Long Reach Access Bevel, 60-degree, 0.5mm X 14mm for use with the CV-5210 Connection Validation...
View full details$46.59| /Sale -
$43.50| /
metcal-cvc-8bv6018p-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-8BV6018P is a Soldering Cartridge for the CV-5200 Connection Validation Soldering Station. This is 1.8mm x 6mm Beveled 60 degree...
View full details$43.50| /Sale -
$43.50| /
metcal-cvc-8bv6018r-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7BV6018R Soldering Cartridge is a long reach, 60-degree bevel cartridge. It is 1.78mm x 14.2mmConnection Valiation Enabled800 Ser...
View full details$43.50| /Sale -
$43.50| /
metcal-cvc-8ch0014p-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-8CH0014P Soldering Cartridge is a 30-degree Chisel tip. It is 1.4mm x 6.0mm and has optimized geometry for best thermal performa...
View full details$43.50| /Sale -
$32.20| /
metcal-cvc-8ch0014s-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-8CH0014S Soldering Cartridge is a 30-degree chisel tip, 1.5mm x 9.9mmConnection Validation Enabled800 SeriesEquivalent to STTC-838V1
$32.20| /Sale -
$43.50| /
metcal-cvc-8ch0015r-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-8CH0015R Soldering Cartridge is a Reach Chisel Bent 30-degree tip, 1.5mm x 11.9mmConnection Validation Enabled800 SeriesEquivalen...
View full details$43.50| /Sale -
$32.20| /
metcal-cvc-8ch0018p-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-8CH0018P soldering cartridge that is a 30-degree chisel and it has optimized geometry for best thermal performance, 1.8mm x 6.0mm...
View full details$32.20| /Sale -
$43.20| /
metcal-dfp-cn5-desoldering-cartridge-1-31-mm-052-2-65-mm-104
MetcalThe Desoldering Cartridges are used with the MFR-HDS De-soldering Hand-piece, primarily for solder removal on through-hole components. The tips ...
View full details$43.20| /Sale -
$43.20| /
metcal-dfp-cn7-desoldering-cartridge-2-44-mm-096-3-65-mm-143
MetcalThe Desoldering Cartridges are used with the MFR-HDS De-soldering Hand-piece, primarily for solder removal on through-hole components. The tips ...
View full details$43.20| /Sale -
$56.40| /
metcal-gt-hc-t4-heater-cartridge-t4
MetcalThe Metcal GT-HC-T4 Heater Cartridge is for use with the GT Series Soldering Stations, and with the GT-HP-T4 Slim Hand-Piece
$56.40| /Sale -
$56.40| /
metcal-gt-hc-t6-heater-cartridge-t6
MetcalThe Metcal GT-HC-T6 Heater Cartridge is for use with the GT Series Soldering Stations and the GT-HP-T6C Standard Hand-Piece
$56.40| /Sale -
$517.75| /
metcal-gt120-hp-t6-soldering-station-120-watt-w-hp-t6c-hand-piece-gt-hc-t6-heater-cartridge-and-workstand
MetcalGT120 Soldering System is an adjustable temperature station that uses inductive technology as the heating mechanism. The complete system includes a...
View full details$517.75| /Sale -
$369.00| /
metcal-gt120-soldering-station-120-watt-w-power-adapter
MetcalGT120 Soldering System is an adjustable temperature station that uses inductive technology as the heating mechanism. The complete system includes a...
View full details$369.00| /Sale -
$8.50| /
metcal-gt4-ch0010p-chisel-power-tip-1mm-x-6mm-60-degree
MetcalThe Metcal GT4-CH0010P Chisel Power Tip is for use with the GT Series Soldering Stations and the GT-HP-T4 Hand Piece.
$8.50| /Sale -
$8.50| /
metcal-gt4-ch0010s-chisel-tip-1mm-x-10mm-40-degree
MetcalThe Metcal GT4-CH0010S is for use with the GT Series Soldering Stations and the GT-HP-T4 Hand Piece.
$8.50| /Sale -
$8.50| /
metcal-gt4-ch0010s-solder-tip-chisel-1mm-x-10mm-60-degree
MetcalMetcal GT4-CH0010S Chisel Solder Tip is for use with the GT Series Stations and the slim hand-piece, GT-HP-T4.
$8.50| /Sale -
$8.50| /
metcal-gt4-ch0014p-chisel-power-tip-1-4mm-x-6mm-60-degree
MetcalThe Metcal GT4-CH0014P Chisel Soldering Tip is for use with the GT Series Soldering Stations and the GT-HP-T4 Hand Piece
$8.50| /Sale -
$8.50| /
metcal-gt4-ch0014p-power-soldering-tip-chisel-1-4mm-x-6mm-60-degree
MetcalThe Metcal GT4-CH0014P Power Soldering Tip is for use with the GT Series Stations, and the slim hand-piece, GT-HP-T4UF.
$8.50| /Sale -
$8.50| /
metcal-gt4-ch0014s-soldering-tip-chisel-1-4mm-x-10mm-40-degree
MetcalThe Metcal GT4-CH0014S Soldering Tip is for use with the GT Series Soldering Stations and the GT-HP-T4 Hand-Piece
$8.50| /Sale -
$8.50| /
metcal-gt4-ch0018p-power-soldering-tip-chisel-1-8mm-x-6mm-60-degree
MetcalThe Metcal GT4-CH0018P Soldering Tip is for use with the GT Series Soldering Stations, and the GT-HP-T4 Hand-Piece.
$8.50| /Sale -
$8.50| /
metcal-gt4-ch0018s-chisel-tip-1-8mm-x-10mm-40-degree
MetcalThe Metcal GT4-CH0018S is for use with the GT Series Soldering Stations and the GT-HP-T4 Hand-Piece.
$8.50| /Sale -
$8.50| /
metcal-gt4-ch0025p-chisel-power-tip-2-5mm-x-6mm-60-degree
MetcalThe Metcal GT4-Ch0025P Chisel Soldering Tip is for use with the GT Series Soldering Stations and the GT-HP-T4 Hand piece
$8.50| /Sale -
$8.50| /
metcal-gt4-ch0025s-chisel-tip-2-5mm-x-10mm-40-degree
MetcalThe Metcal GT4-CH0025S Soldering Tip is for use with the GT4 Soldering Stations and the GT-HP-T4 Hand Piece
$8.50| /Sale -
$8.30| /
metcal-gt4-ch0032p-chisel-power-tip-3-2mm-x-6mm-60-degree
MetcalThe Metcal GT4-CH0032P Chisel Power Soldering Tip is for use with the GT4 Series Stations and the GT-HP-T4 Hand Piece
$8.30| /Sale -
$8.30| /
metcal-gt4-ch0032s-chisel-tip-3-2mm-x-10mm-40-degree
MetcalThe Metcal GT4-CH0032S Chisel Soldering Tip is for use with the GT Series Stations and the GT-HP-T4 Hand piece
$8.30| /Sale -
$8.30| /
metcal-gt4-cn0002r-conical-tip-bent-0-2mm-x-8mm
MetcalThe Metcal GT4-CN0002R Conical Soldering Tip is for use with the GT Series Soldering Stations and the GT-HP-T4 Hand piece
$8.30| /Sale