Skip to content
See a better price? Contact us and we'll match or beat it. (800) 521-9197 or [email protected]
See a better price? Contact us and we'll match or beat it. (800) 521-9197 or [email protected]

Desco 19265 Combo Tester X3 Plus, with Dual Foot Plate

by Kimco
$1,705.25
SKU D-19265

Description The Desco 19265 Combo Tester X3 Plus verifies the functionality of personnel grounding devices (wrist straps1 , foot grounders, ESD shoes, smocks2 ). Three independent tests are performed simultaneously on the wrist strap and each foot. Test prompts and test results with resistance measurements are displayed on the 5 inch color touchscreen display. The administrator menu in the tester’s software may be accessed for test limit preferences. Access control to an ESD Protected Area can be further enforced by using the relay terminal on the Combo Tester X3 Plus and connecting it to an electronic door lock or turnstile to grant access only to those who have passed their personal grounding device tests. The Combo Tester X3 Plus is calibrated to NIST standards and includes a certificate. 

Features of the Desco 19265 Combo Tester X3 Plus:

  • Tests Operator’s Path-To-Ground; Wrist Strap Limits 750 kilohms to 10 megohms, Footwear Limits 750 kilohms to 35 megohms1
    Determines that operator’s personal grounding devices (wrist straps2, foot grounders, ESD shoes, smocks3) are functioning correctly.
  • Displays Resistance Measurements, Temperature and Relative Humidity
    Tracks the performance of ESD wrist straps and footwear
  • Simultaneous Testing in Less Than 2 Seconds
    Reduces time spent testing personal grounding devices used in ESD Control Plans
  • 5 Inch Color Touchscreen Display
    Intuitive user interface for easy test operation
  • Selectable Test Limits
    Use to meet the testing requirements of ANSI/ESD S20.20 or other standards
  • 30 Volt Test Signal
    Provides accurate tests that are not humidity dependent
  • Relay for Use with Automatic Doors or Other Locking Systems
    Controls access to ESD Protected Areas
  • Optional Stand
    Use the EMIT 50416 stand as an alternate installation method for the Combo Tester X3 Plus
  • Compatibility with ESD Glove Test Fixture
    Pair with the EMIT 50755 ESD Glove Test Fixture to allow operators to perform tests while wearing gloves or finger cots
  • Calibration Verification
    Use the EMIT 50424 Limit Comparator to check the test limits of the Combo Tester X3 Plus without removing it from the workplace
  • NIST Calibrated with Certificated Included
    Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. 
  • Made in the United States of America
    This item is made and stocked in Chino, CA.