In-tool Ionizing Blower Model IN5120
The Model IN5120 68KHz AC in-tool air ionizer is a small, efficient static elimination device with variable fan speed for protecting electronic components and general static protection. Using AC corona technology, to make the air more conductive, Ptec™ ionizers produce a bal-anced stream of positive and negative air ions that never need calibration. These devices are used in many indus-tries and manufacturing applications where static electric-ity is a problem.
On the front panel of the IN5120 are two LEDs. The green LED indicates that power is applied to the unit. The red LED is illuminated when an alarm condition occurs. A variable fan speed control, on-off switch, and removable finger guard are also on the front panel.The rear panel of the ionizer has the 24 VDC power input connector and a grounding point.
- Physically small and light.
- Rapidly decays static charges.
- Excellent ion balance
- Ionization (green) and HV alarm (red) lights.
- No periodic adjustments.
- Durable tungsten alloy emitter points.
- Removable front grill.
- Adjustable air volume.
24 VDC, 12W
un-fused, 0.5A or 1.0A max.
5.5"H x 5.5"W x 2.28"D,
(14.0 x 14.0 x 7.6 cm)
1.4lbs, (0.65kg), including stand
32 cfm, High speed
1’ x 5’ area coverage
0 +10 volts
1000V—100V, < 2 seconds @ 12”
< 0.003 ppm, 12” in front of unit, EPA EQOA577019
|RH Operating Range||
|Manufactured By:||Transforming Technologies|
|GoKimco Part #:||TT-IN5120|
|Manufacture Part Number (MPN):||IN5120|
|Country of Manufacture|