Kimco is moving to Hisco.com! Shop this product on Hisco.com for more inventory and improved website experience. View Product
Single Workstation Continuous Monitor Continuously monitors the path-to-ground integrity of one operator, one ESD worksurface, and the electrical ground used to by the monitor.
NEW Monitored Ground Terminal Provides a verified ground point for mats, carts, tools, and other items. Connect with the 09842Multi-Ground Hub.
NEWLight Tower Jack Connects with 19332Light Tower Accessory
NEWAuxiliary Jack Connects with 19333Power Relay Accessory
Wave Distortion Technology Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor
AC Outlet Monitor Circuit Verifies the wiring of an AC outlet and continuously monitors its path-to-ground integrity; fulfills the ANSI/ESD S6.1 section 6.3.1 requirement
Park Delay Timer and Park Snap Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm
Embedded Relay Terminal Activates when a failure is reported by the monitor. Integrates with electronic locks, lights, and buzzers.
Mat Monitor Switch Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
Audible Alarm Adjustment Sets the audible alarm volume from loud to louder
Enclosure with Mounting Tabs Installs in workbench and equipment environments
Single-Wire Impedance Design Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
1.2 Volt Operator Test Voltage Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
<50 Millisecond Alarm Response Time Identifies failures and intermittencies
Continuous Visual and Audible Alarms Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs
Calibration Verification Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
NIST Calibrated with Certificate Included Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
100-240VAC Input with North American Power Cord Works with standard electrical systems in North America, Japan, and Asia
Made in the United States of America This item is made and stocked in Chino, CA.
