Tronex Hand Tools

The Tronex 7112 Oval head cutters are extremely popular. Used for general purpose cutting. Strong. Versatile. Oval head cutters are very popula...

The Tronex 7812 Oval Head Long Heavy Duty Flush Cutter is forged of carbon steel, has strength in the head and joint areas needed to cut heavier ga...

The Tronex 5612 Extra Large Oval Head Flush Cutters are able to cut confidently through heavy duty wire, our extra large oval is popular for a vari...

The Tronex 5071 is one of the most popular tip cutters. Jaw is twice as long as jaw of standard cutters. Jaw is slim with a low, relieved profile. ...

The Tronex 5212 taper head cutters are very popular. The pointed head allows for increased cutting access yet has sufficient strength to avoid tip ...

The Tronex 5048 Fine Tip Cutters offer small, fine blades for getting into extremely tight spots. These specialized cutters are used in electronics...

The Tronex 521 Needle Nose Pliers are mostly used in fine electronics work. The ultra fine tips (.04"/1mm) allow the operator to get into tiny area...

The Tronex 7223 Taper Relief Head Razor Flush Cutters are very popular. The pointed head allows for increased cutting access yet has sufficient str...

The Tronex 7212 taper head cutters are very popular. The pointed head allows for increased cutting access yet has sufficient strength to avoid tip ...

The Tronex 7082 is the most popular angulated cutter. Small cutting head with relief for excellent visibility. Durability combined with fine cuttin...

The Tronex 7071 is one of the most popular tip cutters. Jaw is twice as long as jaw of standard cutters. Jaw is slim with a low, relieved profile. ...

The Tronex 5812 Oval Head Long Heavy Duty Flush Cutter is forged of carbon steel, has strength in the head and joint areas needed to cut heavier ga...

The Tronex 5613 Extra Large Oval Head Razor Flush Cutters are able to cut confidently through heavy duty wire, our extra large oval is popular for ...

The Tronex 5513 large oval head cutters have more head material for greater cutting capacity. General purpose cutting. Often used for cutting cable...

The Tronex 5412 Miniature Taper Head Flush Cutters are used only for exceptionally fine cutting work. Usually access to the cutting area is difficu...

The Tronex 5223 Taper Relief Head Razor Flush Cutters are very popular. The pointed head allows for increased cutting access yet has sufficient str...

The Tronex 511 Chain nose pliers are commonly used in electronic assembly and rework and in fine jewelry and beading work. Tronex chain nose pliers...

The Tronex 7088 Tip cutters are cutting tools with long, narrow jaws that have small, exceptionally sharp edges for cutting at the very tip. All ti...

The Tronex 7083 is an SMT cutter. Steep 70 degree angle with a very fine cutting head allows for special access. Flush cutting edges. An SMT cut...

The Tronex 7072 is the largest cutting head. Robust. Excellent in cutting several leads in a single cut. Relieved for enhanced visibility. Flush cu...

The Tronex 7070 is a very popular tip cutter. Jaw is twice as long as jaw of standard cutters. Jaw is slim with a low, relieved profile. Razor Flus...

The Tronex 7004 has a large cutting edge with pointed tip. Short jaw for enhanced control and flush cutting edges. Taper Flush Cutting Capacity S...

The Tronex 5512 large oval head cutters have more head material for greater cutting capacity. General purpose cutting. Often used for cutting cable...

The Tronex 5213 taper head cutters are very popular. The pointed head allows for increased cutting access yet has sufficient strength to avoid tip ...

The Tronex 5083 is an SMT cutter. Steep 70 degree angle with a very fine cutting head allows for special access. Flush cutting edges. Features of t...

The Tronex 5082 is the most popular angulated cutter. Small cutting head with relief for excellent visibility. Durability combined with fine cuttin...

The Tronex 5080 is an angulated cutter with a very pointed tip which allows for maximum accessibility into confined areas. 50° Angulated Grips on ...

The Tronex 5075 is an SMT cutter with a very small cutting head. Used for exceptionally fine cutting. Relieved for maximum accessibility. Razor Flu...

The Tronex 5070 is a very popular tip cutter. Jaw is twice as long as jaw of standard cutters. Jaw is slim with a low, relieved profile. Razor Flus...

The Tronex 531 Round Nose Pliers has a jaw formed by two long, perfectly machined cones. A round nose pliers is generally used both to clamp and to...

The Tronex 5004 has a large cutting edge with pointed tip. Short jaw for enhanced control and flush cutting edges. Taper Flush Cutting Capacity So...

Needle nose pliers are used primarily in fine electronics work. They have jaws that are machined into thin half cones, this thin profile increases...

Made from solid Tungesten Alloy Steel. Machined and formed to have exceptionally sharp cutting edges. Hardness of 66 to 68 HRC on both cutting edg...

Made from solid Tungesten Alloy Steel. Machined and formed to have exceptionally sharp cutting edges. Hardness of 66 to 68 HRC on both cutting edg...

Made from Carbon Steel with solid Tungsten Carbide material silver brazed into the cutter jaw. Designed with it’s dual material construction combi...

Made from Carbon Steel with solid Tungsten Carbide material silver brazed into the cutter jaw. Designed with it’s dual material construction combi...