Accessories

Large ceramic paper filters to protect pump from flux vapors - set of 10For the following desolder tools:471, 700, 702, 703, 706, & 707

The PACE 6016-0003-P1 Caliper ComForm 1 Lead Forming Tool allows the user to measure the approximate sizes of components and approximate distanc...

The Hakko ESD-Safe 611-2 keeps your bench neat and organized with this handy solder reel stand. Hakko 611-2 Features and Benefits: ESD-Safe Dual...

The Hakko ESD-Safe 611-1 keeps your bench neat and organized with this handy solder reel stand. Hakko 611-1 Features and Benefits: ESD-Safe ...

The Hakko B3218 Locking Assembly Sleeve, Blue for FM-2027 Soldering Iron.

The Hakko B3216 Locking Assembly Sleeve, Yellow for FM-2027 Soldering Iron.

The Hakko B3219 Locking Assembly Sleeve, Green for FM-2027 Soldering Iron.

The Hakko B3217Locking Assembly Sleeve, Yellow for FM-2027 Soldering Iron.

The Hakko A1585 Pre Filter is used for the Hakko FA-430 or HJ-31000 fume extraction units.Replaces 999-13610 per pack

Small ceramic paper filters to protect pump from flux vapors - set of 10For the following desolder tools:471, 700, 702, 703, 706, & 707

PACE 6010-0080-P1 Heater and Seal Assembly for the SX-70 Hand Piece

The Aven 26000 Helping Hands with Magnifier is a sturdy and light magnifier with clamps that is generally used to inspect applications closely whil...

FILTER,5PK, For Smoke Absorbers 491/493/HJ3008

The Daylight U12000 28w energy saving daylight circular tube not only reduces eye-strain but also helps reduce greenhouse gases by consuming 75% le...

The HakkoB1086 0.8mm Nozzle Cleaning Pin for N3, 802, 807, 808, 706, 707, 800, 817, 706 and 707 Stations.

Cleaning pin for 1.0 mm (0.04 in.) nozzle Desoldering Tips.

The Daylight™ UN0004 12w Naturalight™ tubes last up to 10 times longer than ordinary bulbs, in addition it produces a full spectrum light that redu...

The Hakko B1089 1.6mm Nozzle Cleaning Pin for N3, 802, 807, 808, 706, 707, 800, 817, 706 and 707 Stations.

The Maxxeon MXN00601 spare battery pack works with the MXN00620 or the MXN00621 Technician's Headlamp.

The Hakko FA430 fume extraction unit is designed expressly for use at soldering stations, extracting the contaminated air directly at the source. ...

Solder capturing spring filters - set of 10

The Hakko A1586 Main Filter is used for the Hakko FA-430 or HJ-31000 fume extraction units.Pleated filter captures 98% of particles 0.3µm in size

The Beau Tech SH-83 ESD-Safe Orange Sticks are made of high quality non-resin wood which will not contaminate solder and component leads. Natural w...

PACE 6010-0095-P1 Heater Assembly for the PS-90 Soldering Iron