Material Handling & Storage

The Static Dynamics ESDC ESD Clips for Grounding Wire Shelving reduces ESD risks from ungrounded shelving. It's simple just install one or more ESD...

The Fancort RA-18 Series Rack-Alls require no adjustment for handling soldered, clinched or bare boards of almost any size. This universal rack is ...

The Panavise 201 is perfect for arts and crafts, jewelry and model making, electronics, and other small projects! Your work is held gently, but sec...

The Panavise 305 is for working closely to the bench surface, this Base accepts all 300 series Heads.Panavise 305 Features: Single control knob and...

The Panavise 301 has nylon jaws that offer excellent electrical insulation and gentle holding power [continuous heat tolerance up to 200°F (93°C), ...

The Metro R1836BR-13 Super Erecta® Wire Reel Shelf offer an efficient method of storage and transport for standard size component reels. These Sup...

The Metro 9986Z Aluminum Split Sleeve with Zinc Rings for Super Erecta® Posts are perfect for high temperature, over the road, or conductive applic...

Fancort RA-20CP Measures 7" x 20", weighs 2 lbs. 20 slots with easy-to-load angle, .125" W x .325 D on a .750" pitch. Rugged construction with...

The Metro 9985-ESD Conductive Plastic Split Sleeves are replacement ESD-safe sleeves that should be used in place of standard plastic split sleeves...

The Panavise 381 Vacuum Base model combines the original Model 301 head with a powerful suction pad base that allows rapid set-ups in a variety of ...

The Metro 9985H Heavy Duty Black Plastic Split Sleeves are replacement plastic split sleeves (black) for use with the HD Super™ heavy duty shelving...

The Metro 5MESD Super Erecta® Conductive Swivel Non Marking Caster are non carbon loaded and will not mark ESD-Safe Floors. 200 lb. load rate.

The Botron B19025 PCB Handler Conductive Board Holder contains 25 slots (8mm deep 3mm wide) with up to a 16mm pitch. Measures 19″ x 7.5″ including ...

The Metro R1836BR-7 Super Erecta® Wire Reel Shelf offer an efficient method of storage and transport for standard size component reels. These Supe...

The Panavise 376 has a self-centering, extra-wide opening jaws open a full 9" (228.6mm) and hold heavy objects by centering weight over the basePan...

The Panavise 315 holds circuit boards up to 12" (304.8mm) wide and up to 0.156" (4mm) thick.Panavise 315 Features: Arms move independently and feat...

The Panavise 400 Heavy Duty Vise Base has been engineered to hold up to 75 lbs. (34 kg) at 45 degrees. It is recommended for use with the 437 Heavy...

The Panavise 333 Rapid Assembly Circuit Board Holder with 13" Crossbar offers six vertical tilt positions and eight positive rotational positions t...

The Panavise 300 accepts all 300 series Heads and the PV Jr. 203 Head or any 5/8" (15.9mm) diameter shaft.Panavise 300 Features: Single control kno...

ESD Turntable for Ergonomic Assembly Work on heavy, awkward assemblies without struggling. Complete ESD protection with surface resistivity of 5 x ...

The Panavise 437 Heavy Duty Vise Head has four "universal" slots which are 0.29" (7.37 mm) wide for attaching forms, parts, and other items. The sh...

The Panavise 396 wide opening head has ribbed, neoprene jaw pads that are 1.875" (47.6mm) high x 1.5" (38.1mm) wide and provide a sure grip to hold...

The Panavise 366 has jaw pads that gently, yet firmly, hold a wide variety of objects including circuit boards, coils and tuners. Jaws open a gener...

The Panavise 204 protects the finish of your project using these add-on jaw pads.Panavise 204 Features: Neoprene Pads slip over the existing jaws S...