Soldering Supplies

The Hakko 599B-02 will sit perfectly on any work station to hold your iron plus clean your tips to perfection every time. The sponge is hard enough...

The Hakko 599-029 is a replacement solder tip cleaning wire sponge. These sponges are hard enough to remove debris and some corrosion from the sold...

Hakko A1559 Soldering Sponge

The Hakko FS100-01 Tip Rejuvenating / Cleaning Chemical Paste re-tins oxidized soldering iron tips and is 100% Lead-Free. The flux does not contain...

The PACE 6016-0003-P1 Caliper ComForm 1 Lead Forming Tool allows the user to measure the approximate sizes of components and approximate distanc...

The Hakko ESD-Safe 611-2 keeps your bench neat and organized with this handy solder reel stand. Hakko 611-2 Features and Benefits: ESD-Safe Dual...

Hakko A1561 Solder Tip Cleaning Wire Sponge comes standard with the FX888D and the FX100 Soldering Systems.

The Hakko ESD-Safe 611-1 keeps your bench neat and organized with this handy solder reel stand. Hakko 611-1 Features and Benefits: ESD-Safe ...

The Hakko B3218 Locking Assembly Sleeve, Blue for FM-2027 Soldering Iron.

PACE 1265-0009-P1 Glass Chamber for the SX-70 Desoldering Hand piece

PACE 1129-0018-P1 Brass Tip Cleaner Replacement for the TD-100

The Hakko B3216 Locking Assembly Sleeve, Yellow for FM-2027 Soldering Iron.

The Hakko B3219 Locking Assembly Sleeve, Green for FM-2027 Soldering Iron.

The Hakko B3217Locking Assembly Sleeve, Yellow for FM-2027 Soldering Iron.

The Omnivise 15 designed to hold printed circuit boards level while reworking them, but it can adapt easily to anything in the horizontal plane. H...

PACE 1309-0018-P50 Soldr-X-Tractor Filters for PACE SX Hand Pieces are used in the Glass Chamber and Sodr/Flux Traps

PACE 1309-0054-P10 Solder & Flux Extractor Chamber for SX-80, SX-90 and SX-100 Series Solder Irons

PACE 6010-0080-P1 Heater and Seal Assembly for the SX-70 Hand Piece

Cleaning pin for 1.0 mm (0.04 in.) nozzle Desoldering Tips.

PACE 1309-0028-P1 Replacement VisiFilter for SX-80

PACE 1309-0018-P10 Soldr-X-Tractor Filters for PACE SX Hand Pieces are used in the Glass Chamber and Sodr/Flux Traps

PACE 1265-0011-P1 Glass Chamber for SX-100 / SX-90 / SX-80 hand pieces

The HakkoB1086 0.8mm Nozzle Cleaning Pin for N3, 802, 807, 808, 706, 707, 800, 817, 706 and 707 Stations.

The Hakko B1089 1.6mm Nozzle Cleaning Pin for N3, 802, 807, 808, 706, 707, 800, 817, 706 and 707 Stations.