Filters
Shop Benchtools For Electronic Assembly from Metcal
Metcal provides advanced technology tools helpful in hand soldering, convection rework, fume extraction, and fluid dispensing processes. With the introduction of SmartHeat Systems, Metcal changed the rework definition and has set new standards for designs and ease-of-use. The products are designed to provide flexibility, reliability, ROI, and high performance.
The Metcal Soldering Systems provide users with a wide range of product choices such as:
- Desoldering Irons to provide a high-quality service while performing desoldering tasks.
- Desoldering Stations for adjusting heat settings and removing the solder.
- Desoldering Tips to remove components, for PCB repair, and it doesn’t require constant maintenance as well.
- Dispensing Systems for delivering precise amounts of liquid into a microplate or tube.
- Desoldering Nozzles for removing solder and also when you need to desolder components from a circuit board.
- ESD Safe Vacuum Cleaners to reduce any chances of damaging components while cleaning devices and prevent electronic equipment interruptions and failures.
- Fume Extraction Systems with low noise to pull fumes and particulate into a filtration system thus, cleaning the air.
- Hot Air Nozzles to work with thin pipes flexibly and with great ease.
- Iron and Pencil Stands to keep the hot soldering iron and other tools.
- Lead-Free Solder Irons to work with minimum possible problems. These irons do not wet well so you can get better lead spacing.
- Lead-Free Soldering Station is used as soldering tools and for soldering of PCB boards as well.
- PCB Vise to hold a printed circuit board and for making your work easier.
- Preheater to heat air before carrying out any other process and Hot Plate for transferring heat well.
- Tip Maintenance and Sponges to preserve the tip life and save your time.
Metcal is an expert manufacturer of benchtop solutions. It’s problem-solving, reliable, and flexible handy services have always been in demand in the soldering market. You can opt from the long list of available products by Metcal.
-
$34.50| /
metcal-sttc-843-conical-sharp-tip-3-128-for-mx-series-systems
MetcalThe Metcal STTC-843 Conical Sharp Tip 3/128" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Solderin...
View full details$34.50| /Sale -
$81.09| /
metcal-sttc-1173p-knife-high-power-tip-5mm-for-mx-series-systems
MetcalThe Metcal STTC-1173P Knife High Power Tip 5mm tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Solder...
View full details$81.09| /Sale -
$30.80| /
metcal-sttc-099-chisel-bent-tip-3-64-for-mx-series-systems
MetcalThe Metcal STTC-099 Chisel Bent Tip 3/64" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Soldering I...
View full details$30.80| /Sale -
$67.59| /
metcal-smtc-106-surface-mount-removal-tip-soic-14
MetcalThe Metcal SMTC Series tips are for use with the MX-RM3E Soldering Iron Handpiece. Metcal SMTC-106 Features: Designed for reworking SMT Comp...
View full details$67.59| /Sale -
$21.40| /
metcal-scv-drk50-knife-solder-tip-5-0mm-20-for-metcal-mfr-units-and-ps-900-stations
MetcalMetcal SCV-DRK50 Knife Solder Tip is used in the popular MFR-1120 and the MFR-2220 Rework Systems. The SCV-DRK50 offers SmartHeat® Technology th...
View full details$21.40| /Sale -
$13.30| /
metcal-scv-cn05-conical-solder-tip-0-5mm-02-for-metcal-mfr-units-and-ps-900-stations
MetcalThe Metcal SCV-CN05 Conical Solder Tip is used in the popular MFR-1120 and the MFR-2220 Rework Systems. The SCV-CN05 offers SmartHeat® Technolog...
View full details$13.30| /Sale -
$121.00| /
metcal-pttc-805-precision-tweezer-tip-cartridges-blade-16mm-pair-for-mx-ptz-handpiece
MetcalThe Metcal PTTC-805 Tweezer Tip Cartridges are for the MX-PTZ Precision Tweezer Handpiece and the MX-5000 Series Systems. The MX-PTTC Series ...
View full details$121.00| /Sale -
$91.36| /
metcal-pttc-801-precision-tweezer-tip-cartridges-conical-0-4mm-pair-for-mx-ptz-handpiece
MetcalThe Metcal PTTC-801 Tweezer Tip Cartridges are for the MX-PTZ Precision Tweezer Handpiece and the MX-5000 Series Systems. The MX-PTTC Series ...
View full details$91.36| /Sale -
$1,294.00| /
metcal-pct-102-11-convection-air-preheater-with-arm-rest-and-board-holder
MetcalConvection-Air Preheater accelerates and enhances lead-free work. OK International's PCT-100 Pre-heater Convection Tool prioritizes efficiency and...
View full details$1,294.00| /Sale -
$240.00| /
metcal-mfr-uk1-cartridge-hand-piece-and-workstand-upgrade-kit
MetcalThe Metcal MFR-UK1 is an upgrade kit for your MFR System. All kits include both the hand piece and work stand.Accepts the SFP or SCP Series TipsMFR...
View full details$240.00| /Sale -
$488.00| /
metcal-bh-1000-post-rail-board-holder-for-the-pct-1000
MetcalThe BH-1000 board holder consists of posts and rails and is a highly flexible system. It has two sets of post-rail assemblies (two posts, one rail ...
View full details$488.00| /Sale -
$14.16| /
metcal-gt6-hf6010s-hoof-solder-tip-1mm-x-16mm-60-degree
MetcalThe Metcal GT6-HF6010S Hoof solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$14.16| /Sale -
$19.59| /
metcal-sfp-ch15-chisel-cartridge-30-degrees-1-5mm-06
MetcalSFP-CH15 Chisel 30° 1.5mm x 10mm (.06" x .39") Features and Benefits: The SxP Cartridges are for use with the MFR-H1-SC soldering cartrid...
View full details$19.59| /Sale -
$193.00| /
metcal-cv-h1-av-connection-validation-handpiece
MetcalThe Metcal CV-H1-AV Connection Validation is an advanced handpiece with integrated LED light and 6' cord. The LED light signals that a good solder...
View full details$193.00| /Sale -
$43.50| /
metcal-cvc-8bv6018r-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7BV6018R Soldering Cartridge is a long reach, 60-degree bevel cartridge. It is 1.78mm x 14.2mmConnection Valiation Enabled800 Ser...
View full details$43.50| /Sale -
$680.00| /
metcal-mx-500av-soldering-rework-system-with-mx-h1-av-soldering-iron
MetcalThe Metcal MX-500AV Soldering Rework Station utilizes SmartHeat® Technology, wherein each cartridge is equipped with a self-regulating heater which...
View full details$680.00| /Sale -
$23.70| /
metcal-ssc-746a-chisel-long-reach-soldering-cartridge-tip
MetcalThe Metcal SSC-746A Chisel Long Reach Soldering Cartridge Tips have a high power coil assembly that delivers additional power to demanding solde...
View full details$23.70| /Sale -
$20.17| /
metcal-ssc-626a-conical-sharp-bent-soldering-cartridge-tip
MetcalThe Metcal SSC-626A Conical Sharp Bent Soldering Cartridge Tips have a new, high power coil assembly that delivers additional power to demanding...
View full details$20.17| /Sale -
$107.12| /
metcal-mx-w5ds-tipsaver-workstand-cradle-for-mx-ds1-hand-piece
MetcalThe Metcal MX-W5DS TipSaver™ Workstand Cradle for MX-DS1 Hand-piece
$107.12| /Sale -
$20.20| /
metcal-ssc-701a-sharp-conical-soldering-tip-cartridge-1-00mm-for-mfr-systems
MetcalThe Metcal SSC-701A Soldering Tip Cartridge is a replacement for the MFR-H6-SCC and SP-HC1 Soldering Irons. Metcal SSC-701A Features and Benef...
View full details$20.20| /Sale -
$23.70| /
metcal-ssc-754a-sharp-bent-soldering-tip-cartridge-0-51mm-for-mfr-systems
MetcalThe Metcal SSC-754A Soldering Tip Cartridge is a replacement for the MFR-H6-SCC and SP-HC1 Soldering Irons. Metcal SSC-754A Features and Benef...
View full details$23.70| /Sale -
$851.00| /
metcal-mfr-2211-dual-output-soldering-and-rework-system-w-2-cartridge-handpieces-and-workstands
MetcalThe Metcal MFR-2211 Dual Output Soldering and Rework System is part of the MFR-2200 Series that feature a choice of tools to support PCB and compon...
View full details$851.00| /Sale -
$199.00| /
metcal-tatc-604-blade-talon-cartridge-tips-2-81-600-series
MetcalTATC Tips for MX Talon Stations. Metcal's unique design means that a wide range of components can be removed by a small range of tips. You can r...
View full details$199.00| /Sale -
$98.20| /
metcal-stdc-804l-desolder-long-reach-tip-cartridge-040-for-mx-5000-series-systems
MetcalThe Metcal STDC-804L is a Desoldering Tip for Metcal MX-DS1 Pistol Grip Desoldering Handpiece. STDC cartridges are highly durable and designed ...
View full details$98.20| /Sale