Metcal

The Metcal GT4-CN1608R Conical Soldering Tip is for use with the GT Series Soldering Stations and the GT-HP-T4 Hand Piece.

Use with 900 System Syringes to seal barrel between uses or to seal any valve. Fits all syringe sizes. Available in packs of 50. Made from Polyprop...

The TE Needle Series consist of a stainless-steel cannula with a double helix Polypropylene hub.This premier line of dispensing needles is burr-fre...

Spread the pressure evenly across product, using a piston, for consistent dispensing of even high viscosity products. Wiper Pistons (white) provide...

The Metcal AC-BP is a soft, coiled brass tip cleaner often preferred tip cleaning method that reduces the potential to introduce contaminants to th...

Metcal AC-CP2 is a large cartridge removal pad for the MX Series and PS series soldering stations.

The Metcal AC-TC-P Tip Cleaner removes unwanted solder and flux build-up from desoldering tip.Set of 12 Rods Sizes 0.50mm - Pack of 12 sets

The Metcal AC-Y10 Solder Tip Cleaning Sponge with Center Hole can be used with OK International MFR iron stands

The BH-1000 board holder consists of posts and rails and is a highly flexible system. It has two sets of post-rail assemblies (two posts, one rail ...

Metcal BVX-100 Series Fume Extraction Systems are powerful, but low noise units that need no external ducting or compressor. Simply move these ligh...

The BVX-200 Series Fume Extraction Systems are revolutionary two-arm units that combine powerful fan performance with efficient filtration, quiet o...

The BVX-200 Series Fume Extraction Systems are revolutionary two-arm units that combine powerful fan performance with efficient filtration, quiet o...

The Metcal BVX-201-KIT1 is a two operator, PRE-HEPA-GAS volume extraction system with two BVX-ARM-K1 designed to be used adjacent to the workbenche...

The Metcal CV-H1-AV Connection Validation is an advanced handpiece with integrated LED light and 6' cord. The LED light signals that a good solder...

The Metcal OK-CVC-7BV6005A Solder Cartridge is a Long Reach Access Bevel, 60-degree, 0.5mm X 14mm for use with the CV-5210 Connection Validation...

The Metcal CVC-7BV6018P is a Soldering Cartridge for the CV-5200 Connection Validation Soldering Station. This is 1.8mm x 6mm Beveled 60 degree...

The Metcal CVC-7BV6018R Soldering Cartridge is a long reach, 60-degree bevel cartridge. It is 1.78mm x 14.2mmConnection Valiation Enabled700 Se...

The Metcal CVC-7CH0010S Soldering Cartridge is a 30-degree Chisel tip, 1.0mm x 9.1mm.Connection Validation Enabled700 SeriesEquivalent to STTC-125

The Metcal CVC-7CH0014P Soldering Cartridge is a 30-degree Chisel tip. It is 1.4mm x 6.0mm and has optimized geometry for best thermal performa...

The Metcal CVC-7CH0014S Soldering Cartridge is a 30-degree chisel tip, 1.5mm x 9.9mmConnection Validation Enabled700 SeriesEquivalent to STTC-138

The Metcal CVC-7CH0015R Soldering Cartridge is a Reach Chisel Bent 30-degree tip, 1.5mm x 11.9mmConnection Validation Enabled700 SeriesEquivalen...

The Metcal CVC-7CH0018A Access Soldering Cartridge is a long reach chisel tip, 1.78mm x 16mmConnection Validation Enabled.700 SeriesEquivalent t...

The Metcal OK-CVC-8BV6005A Solder Cartridge is a Long Reach Access Bevel, 60-degree, 0.5mm X 14mm for use with the CV-5210 Connection Validation...

The Metcal CVC-8BV6018P is a Soldering Cartridge for the CV-5200 Connection Validation Soldering Station. This is 1.8mm x 6mm Beveled 60 degree...