Filters
Shop Benchtools For Electronic Assembly from Metcal
Metcal provides advanced technology tools helpful in hand soldering, convection rework, fume extraction, and fluid dispensing processes. With the introduction of SmartHeat Systems, Metcal changed the rework definition and has set new standards for designs and ease-of-use. The products are designed to provide flexibility, reliability, ROI, and high performance.
The Metcal Soldering Systems provide users with a wide range of product choices such as:
- Desoldering Irons to provide a high-quality service while performing desoldering tasks.
- Desoldering Stations for adjusting heat settings and removing the solder.
- Desoldering Tips to remove components, for PCB repair, and it doesn’t require constant maintenance as well.
- Dispensing Systems for delivering precise amounts of liquid into a microplate or tube.
- Desoldering Nozzles for removing solder and also when you need to desolder components from a circuit board.
- ESD Safe Vacuum Cleaners to reduce any chances of damaging components while cleaning devices and prevent electronic equipment interruptions and failures.
- Fume Extraction Systems with low noise to pull fumes and particulate into a filtration system thus, cleaning the air.
- Hot Air Nozzles to work with thin pipes flexibly and with great ease.
- Iron and Pencil Stands to keep the hot soldering iron and other tools.
- Lead-Free Solder Irons to work with minimum possible problems. These irons do not wet well so you can get better lead spacing.
- Lead-Free Soldering Station is used as soldering tools and for soldering of PCB boards as well.
- PCB Vise to hold a printed circuit board and for making your work easier.
- Preheater to heat air before carrying out any other process and Hot Plate for transferring heat well.
- Tip Maintenance and Sponges to preserve the tip life and save your time.
Metcal is an expert manufacturer of benchtop solutions. It’s problem-solving, reliable, and flexible handy services have always been in demand in the soldering market. You can opt from the long list of available products by Metcal.
-
$15.69| /
metcal-ac-bp-brass-pads-for-workstands-10-pk
MetcalThe Metcal AC-BP is a soft, coiled brass tip cleaner often preferred tip cleaning method that reduces the potential to introduce contaminants to th...
View full details$15.69| /Sale -
$11.81| /
metcal-ac-tc-p-desoldering-cartridge-tip-cleaner
MetcalThe Metcal AC-TC-P Tip Cleaner removes unwanted solder and flux build-up from desoldering tip.Set of 12 Rods Sizes 0.50mm - Pack of 12 sets
$11.81| /Sale -
$33.50| /
metcal-ac-y10-solder-tip-cleaning-sponge-with-center-hole-10-per-pack
MetcalThe Metcal AC-Y10 Solder Tip Cleaning Sponge with Center Hole can be used with OK International MFR iron stands
$33.50| /Sale -
$670.00| /
metcal-pct-100-11-convection-focus-preheater
MetcalThe Metcal PCT-100-11 Convection Focus Preheater accelerates and enhances lead-free work. The PCT-100 Pre-heater Convection Tool prioritizes effic...
View full details$670.00| /Sale -
$22.30| /
metcal-mfr-dc10-disposable-collection-chamber-for-mfr-h5-ds-10pk
MetcalThe Metcal MFR-DC10 Disposable Collection Chamber is a pack of ten disposable collection chambers for use with the MFR-H5-DS desoldering hand piece...
View full details$22.30| /Sale -
$51.41| /
metcal-ps-ca3-heater-coil-assembly-for-ps-900
MetcalThe Metcal PS-CA3 is a Coil Assembly for SxV Soldering Tips and CxV Blade Tips only.Compatible with PS-900 Soldering System and PS-H3 Hand-piece.Th...
View full details$51.41| /Sale -
$2,108.00| /
metcal-pct-1000-programmable-preheater-350w-convection-type-k-t-c-kit
MetcalThe Metcal PCT-1000 is a programmable preheater that provides users exceptional ability to increase heat capacity with highly controlled thermal ou...
View full details$2,108.00| /Sale -
$100.69| /
metcal-pct-ar-arm-rest-for-pct-100-preheater
MetcalConvection-Air Preheater accelerates and enhances lead-free work. OK International's PCT-100 Pre-heater Convection Tool prioritizes efficiency and...
View full details$100.69| /Sale -
$41.00| /
metcal-mx-dcf1-replacement-chamber-line-filters
MetcalThe Metcal MX-DCF1 Replacement Chamber Line & Filters is for the MX-DS1 Desoldering Hand-piece.Pack of 15 chamber liners and 6 filters
$41.00| /Sale -
$1,294.00| /
metcal-pct-102-11-convection-air-preheater-with-arm-rest-and-board-holder
MetcalConvection-Air Preheater accelerates and enhances lead-free work. OK International's PCT-100 Pre-heater Convection Tool prioritizes efficiency and...
View full details$1,294.00| /Sale -
$488.00| /
metcal-bh-1000-post-rail-board-holder-for-the-pct-1000
MetcalThe BH-1000 board holder consists of posts and rails and is a highly flexible system. It has two sets of post-rail assemblies (two posts, one rail ...
View full details$488.00| /Sale -
$14.16| /
metcal-gt6-hf6010s-hoof-solder-tip-1mm-x-16mm-60-degree
MetcalThe Metcal GT6-HF6010S Hoof solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$14.16| /Sale -
$148.00| /
metcal-mx-rm8e-esd-safe-enhanced-instrument-desoldering-cord-with-cp2
MetcalMX-500 Rework System Handpieces & Accessories.
$148.00| /Sale -
$9.19| /
metcal-ac-cp2-large-cartridge-removal-pad-for-mx-500-and-ps-stations
MetcalMetcal AC-CP2 is a large cartridge removal pad for the MX Series and PS series soldering stations.
$9.19| /Sale -
$38.90| /
metcal-gtc-ch0040s-chisel-cartridge-4mm-x-10mm-40-degree
MetcalThe Metcal GTC-CH0040S Chisel soldering cartridge is for use with the GT Series soldering stations and the GT-HP-T6C hand pieces
$38.90| /Sale -
$38.90| /
metcal-gtc-ch0025s-chisel-cartridge-2-5mm-x-10mm-40-degree
MetcalThe Metcal GTC-CH0025S Chisel solder cartridge is for use with the GT Series soldering stations and the GT-HP-T6C hand piece.
$38.90| /Sale -
$38.90| /
metcal-gtc-ch0018s-chisel-cartridge-1-8mm-x-10mm-40-degree
MetcalThe Metcal GTC-CH0018S Chisel cartridge is for use with the GT Series soldering stations and the GT-HP-T6C hand pieces.
$38.90| /Sale -
$38.90| /
metcal-gtc-ch0014s-chisel-cartridge-1-4mm-x-10mm-40-degree
MetcalThe Metcal GTC-Ch0014S Chisel Cartridge is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$38.90| /Sale -
$38.90| /
metcal-gtc-ch0010s-chisel-cartridge-1mm-x-10mm-40-degree
MetcalThe Metcal GTC-CH0010S Chisel cartridge is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$38.90| /Sale -
$16.12| /
metcal-gt6-hf3025v-concave-bent-hoof-solder-tip-2-5mm-x-16mm-30-degree
MetcalThe Metcal GT6-HF3025V Concave Hoof Solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece.
$16.12| /Sale -
$16.12| /
metcal-gt6-hf6030v-concave-hoof-solder-tip-3mm-x-12mm-60-degree
MetcalThe Metcal GT6-HF6030V Concave Hoof Solder Tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece.
$16.12| /Sale -
$16.50| /
metcal-gt6-hf6020v-concave-hoof-solder-tip-2mm-x-12mm-60-degree
MetcalThe Metcal GT6-HF6020V Hoof Solder Tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$16.50| /Sale -
$16.12| /
metcal-gt6-hf6015v-concave-hoof-solder-tip-1-5mm-x-12mm-60-degree
MetcalThe Metcal GT6-HF6015V Hoof Solder Tip is for use with the GT Series stations and the GT-HP-T6C hand piece
$16.12| /Sale -
$14.50| /
metcal-gt6-hf6040s-hoof-solder-tip-4mm-x-16mm-60-degree
MetcalThe Metcal GT6-HF6040S Hoof soldering tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece.
$14.50| /Sale -
$14.16| /
metcal-gt6-hf6030s-hoof-solder-tip-3mm-x-16mm-60-degree
MetcalThe Metcal GT6-HF6030S Hoof solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$14.16| /Sale -
$14.16| /
metcal-gt6-hf6020s-hoof-solder-tip-2mm-x-16mm-60-degree
MetcalThe Metcal GT6-HF6020S Hoof solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$14.16| /Sale -
$14.16| /
metcal-gt6-hf6015s-hoof-tip-1-5mm-x-16mm-60-degree
MetcalThe Metcal GT6-HF6015S Hoof solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$14.16| /Sale -
$14.50| /
metcal-gt6-kn0025p-knife-power-tip-2-5mm-x-13mm-45-degree
MetcalThe Metcal GT6-KN0025P Knife solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$14.50| /Sale -
$14.50| /
metcal-gt6-kn0025s-knife-solder-tip-2-5mm-x-16mm
MetcalThe Metcal GT6-KN0025S Knife solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$14.50| /Sale -
$10.50| /
metcal-gt6-cn1505r-conical-bent-tip-reach-0-5mm-x-15mm
MetcalThe Metcal GT6-CN1505R Conical soldering tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.50| /
metcal-gt6-cn0004r-conical-bent-solder-tip-0-4mm-x-8mm
MetcalThe Metcal GT6-CN0004R Conical solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.50| /
metcal-gt6-cn0002r-conical-bent-solder-tip-0-2mm-x-8-mm
MetcalThe Metcal GT6-CN0002R Conical solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.50| /
metcal-gt6-cn1608r-conical-bent-soldering-tip-access-8mm-x-16mm
MetcalThe Metcal GT6-CN1608R Conical soldering tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.50| /
metcal-gt6-cn2213r-conical-bent-solder-tip-reach-1-3mm-x-22mm
MetcalThe Metcal GT6-CN2213R Conical solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.50| /
metcal-gt6-cn1505a-conical-solder-tip-sharp-0-5mm-x-15mm
MetcalThe Metcal GT6-CN1505A Conical solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.50| /
metcal-gt6-cn1502a-conical-solder-tip-sharp-0-2mm-x-15mm
MetcalThe Metcal GT6-CN1502A Conical solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.50| /
metcal-gt6-cn0010p-conical-power-tip-1mm-x-6mm
MetcalThe Metcal GT6-CN0010P Conical Power Tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.50| /
metcal-gt6-cn0010a-conical-solder-tip-access-1mm-x-10mm
MetcalThe Metcal GT6-CN0010A Conical solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.50| /
metcal-gt6-cn0005s-conical-solder-tip-0-5mm-x-10mm
MetcalThe Metcal GT6-CN0005S Conical solder tip is for use with the GT Series Soldering Stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.50| /
metcal-gt6-cn0005a-conical-solder-tip-access-0-5mm-x-14mm
MetcalThe Metcal GT6-CN0005A Conical solder tip is for use with the GT Series Soldering Stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.50| /
metcal-gt6-cn0005p-conical-power-tip-0-5mm-x-6mm
MetcalThe Metcal GT6-CN0005P Conical solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.50| /
metcal-gt6-ch0032p-chisel-power-tip-3-2mm-x-6mm-60-degree
MetcalThe Metcal GT6-CH0032P Chisel solder tip is for use with the GT Series Soldering Stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.50| /
metcal-gt6-ch0025p-chisel-power-tip-2-5mm-x-6mm-60-degree
MetcalThe Metcal GT6-CH0025P Chisel solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.26| /
metcal-gt6-ch0014p-chisel-power-tip-1-4mm-x-6mm-60-degree
MetcalThe Metcal GT6-CH0014P Chisel solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece.
$10.26| /Sale -
$10.50| /
metcal-gt6-ch0010p-chisel-power-tip-1mm-x-6mm-60-degree
MetcalThe Metcal GT6-CH0010P Chisel Solder Tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece
$10.50| /Sale -
$10.50| /
metcal-gt6-ch0032s-chisel-solder-tip-3-2mm-x-10mm-40-degree
MetcalThe Metcal GT6-CH0032S Chisel solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece.
$10.50| /Sale -
$10.50| /
metcal-gt6-ch0025s-chisel-solder-tip-2-5mm-x-10mm-40-degree
MetcalThe Metcal GT6-CH0025S chisel solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece.
$10.50| /Sale -
$10.50| /
metcal-gt6-ch0018s-chisel-solder-tip-1-8mm-x-10mm-40-degree
MetcalThe Metcal GT6-CH0018S Chisel solder tip is for use with the GT Series soldering stations and the GT-HP-T6C hand piece.
$10.50| /Sale