• Send Us a Message
  • Skip to content


    by Desco
    SKU D-19330
    Satisfaction Guarantee
    • Single Workstation Continuous Monitor
      Continuously monitors the path-to-ground integrity of one operator, one ESD worksurface, and the electrical ground used to by the monitor.
    • NEW Monitored Ground Terminal
      Provides a verified ground point for mats, carts, tools, and other items. Connect with the 09842 Multi-Ground Hub.
    • NEW Light Tower Jack
      Connects with 19332 Light Tower Accessory
    • NEW Auxiliary Jack
      Connects with 19333 Power Relay Accessory
    • Wave Distortion Technology
      Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor
    • AC Outlet Monitor Circuit
      Verifies the wiring of an AC outlet and continuously monitors its path-to-ground integrity; fulfills the ANSI/ESD S6.1 section 6.3.1 requirement
    • Park Delay Timer and Park Snap
      Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm
    • Embedded Relay Terminal
      Activates when a failure is reported by the monitor. Integrates with electronic locks, lights, and buzzers.
    • Mat Monitor Switch
      Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
    • Audible Alarm Adjustment
      Sets the audible alarm volume from loud to louder
    • Enclosure with Mounting Tabs
      Installs in workbench and equipment environments
    • Single-Wire Impedance Design
      Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
    • 1.2 Volt Operator Test Voltage
      Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
    • <50 Millisecond Alarm Response Time
      Identifies failures and intermittencies
    • Continuous Visual and Audible Alarms
      Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs
    • Calibration Verification
      Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
    • NIST Calibrated with Certificate Included
      Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. 
    • 100-240VAC Input with North American Power Cord
      Works with standard electrical systems in North America, Japan, and Asia
    • Made in the United States of America
      This item is made and stocked in Chino, CA. 
    • Suggested replacement for the Desco 19321