Filters
Shop Benchtools For Electronic Assembly from Metcal
Metcal provides advanced technology tools helpful in hand soldering, convection rework, fume extraction, and fluid dispensing processes. With the introduction of SmartHeat Systems, Metcal changed the rework definition and has set new standards for designs and ease-of-use. The products are designed to provide flexibility, reliability, ROI, and high performance.
The Metcal Soldering Systems provide users with a wide range of product choices such as:
- Desoldering Irons to provide a high-quality service while performing desoldering tasks.
- Desoldering Stations for adjusting heat settings and removing the solder.
- Desoldering Tips to remove components, for PCB repair, and it doesn’t require constant maintenance as well.
- Dispensing Systems for delivering precise amounts of liquid into a microplate or tube.
- Desoldering Nozzles for removing solder and also when you need to desolder components from a circuit board.
- ESD Safe Vacuum Cleaners to reduce any chances of damaging components while cleaning devices and prevent electronic equipment interruptions and failures.
- Fume Extraction Systems with low noise to pull fumes and particulate into a filtration system thus, cleaning the air.
- Hot Air Nozzles to work with thin pipes flexibly and with great ease.
- Iron and Pencil Stands to keep the hot soldering iron and other tools.
- Lead-Free Solder Irons to work with minimum possible problems. These irons do not wet well so you can get better lead spacing.
- Lead-Free Soldering Station is used as soldering tools and for soldering of PCB boards as well.
- PCB Vise to hold a printed circuit board and for making your work easier.
- Preheater to heat air before carrying out any other process and Hot Plate for transferring heat well.
- Tip Maintenance and Sponges to preserve the tip life and save your time.
Metcal is an expert manufacturer of benchtop solutions. It’s problem-solving, reliable, and flexible handy services have always been in demand in the soldering market. You can opt from the long list of available products by Metcal.
-
$35.30| /
metcal-sttc-113-chisel-soldering-cartridge-tip
MetcalThe Metcal STTC-113 Chisel Tips provide a wide range of options for through-hole and SMD Rework. For use with the MX-500 and MX-5000 & MX-52...
View full details$35.30| /Sale -
$19.60| /
metcal-sfp-ch50-chisel-cartridge-5-0mm-20-for-mfr-systems
MetcalThe Metcal SFP-CH50 is a replacement soldering tip cartridge for the MFR-H1-SC and MFR-HSR Soldering Irons. Metcal SFP Features and Benefits: ...
View full details$19.60| /Sale -
$13.30| /
metcal-scv-cnl04-conical-long-solder-tip-0-4mm-016-for-metcal-mfr-units-and-ps-900-stations
MetcalThe Metcal SCV-CNL04 Conical Long Solder Tip is used in the popular MFR-1120 and the MFR-2220 Rework Systems. The SCV-CNL04 offers SmartHeat® Te...
View full details$13.30| /Sale -
$21.30| /
metcal-ssc-737a-chisel-soldering-cartridge-tip
MetcalThe Metcal SSC-737A Chisel Soldering Cartridge Tips have a high power coil assembly that delivers additional power to demanding solder joints, w...
View full details$21.30| /Sale -
$26.80| /
metcal-ssc-772a-chisel-soldering-cartridge-tip
MetcalThe Metcal SSC-772A Chisel Soldering Cartridge Tips have a high power coil assembly that delivers additional power to demanding solder joints, w...
View full details$26.80| /Sale -
$13.30| /
metcal-sfv-ch50-extra-large-chisel-solder-tip-5-0mm-20-for-metcal-mfr-systems
MetcalThe Metcal SFV-CH50 Extra Large Chisel Solder Tip is used in the popular MFR-1120 and the MFR-2220 Rework Systems. The SFV-CH50 offers SmartHeat...
View full details$13.30| /Sale -
$37.60| /
metcal-uftc-7chl06-ultrafine-long-chisel-soldering-tip-for-the-mx-h2-uf-hand-piece-0-6mm-x-9mm
MetcalThe Metcal UFTC-7CHL06 UltraFine™ Soldering Tip are only for use with the MX-H2-UF UltraFine™ soldering handpiece. Metcal UFTC-7CHL06 Features:...
View full details$37.60| /Sale -
$40.20| /
metcal-sttc-865-long-reach-chisel-tip-13-64-for-mx-systems
MetcalThe Metcal STTC-865 Long Reach Chisel Tip 13/64" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Sold...
View full details$40.20| /Sale -
$30.80| /
metcal-sttc-840-conical-bent-tip-3-64-for-mx-series-systems
MetcalThe Metcal STTC-840 Conical Bent Tip 3/64" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Soldering ...
View full details$30.80| /Sale -
$29.60| /
metcal-sttc-147-long-reach-bevel-soldering-cartridge-tip
MetcalThe Metcal STTC-147 Long Reach Bevel Tips provide a wide range of options for through-hole and SMD Rework. For use with the MX-500 and MX-5000 &...
View full details$29.60| /Sale -
$32.20| /
metcal-sttc-101p-conical-sharp-high-power-tip-1-32-for-mx-series-systems
MetcalThe Metcal STTC-101P Conical Sharp High Power Tip 1/32" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM...
View full details$32.20| /Sale -
$29.60| /
metcal-sttc-017-chisel-soldering-cartridge-tip
MetcalThe Metcal STTC-017 Chisel Tips provide a wide range of options for through-hole and SMD Rework. For use with the MX-500 and MX-5000 & MX-52...
View full details$29.60| /Sale -
$19.60| /
metcal-sfp-cn04-conical-cartridge-0-4mm-016-for-mfr-systems
MetcalThe Metcal SFP-CN04 is a replacement soldering tip cartridge for the MFR-H1-SC and MFR-HSR Soldering Irons. Metcal SFP Features and Benefits: ...
View full details$19.60| /Sale -
$19.60| /
metcal-sfp-ch10-chisel-cartridge-1-0mm-04-for-mfr-systems
MetcalThe Metcal SFP-CH10 is a replacement soldering tip cartridge for the MFR-H1-SC and MFR-HSR Soldering Irons. Metcal SFP Features and Benefits: ...
View full details$19.60| /Sale -
$24.60| /
metcal-sfp-bvl10-bevel-cartridge-1-0mm-04-for-mfr-systems
MetcalThe Metcal SFP-BLV10 is a replacement soldering tip cartridge for the MFR-H1-SC and MFR-HSR Soldering Irons. Metcal SFP Features and Benefits: ...
View full details$24.60| /Sale -
$47.20| /
metcal-cvc-7ch0018a-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7CH0018A Access Soldering Cartridge is a long reach chisel tip, 1.78mm x 16mmConnection Validation Enabled.700 SeriesEquivalent t...
View full details$47.20| /Sale -
$32.20| /
metcal-cvc-7ch0014s-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7CH0014S Soldering Cartridge is a 30-degree chisel tip, 1.5mm x 9.9mmConnection Validation Enabled700 SeriesEquivalent to STTC-138
$32.20| /Sale -
$43.50| /
metcal-cvc-8ch0015r-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-8CH0015R Soldering Cartridge is a Reach Chisel Bent 30-degree tip, 1.5mm x 11.9mmConnection Validation Enabled800 SeriesEquivalen...
View full details$43.50| /Sale -
$32.20| /
metcal-cvc-7ch0015r-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7CH0015R Soldering Cartridge is a Reach Chisel Bent 30-degree tip, 1.5mm x 11.9mmConnection Validation Enabled700 SeriesEquivalen...
View full details$32.20| /Sale -
$43.50| /
metcal-cvc-7ch0014p-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7CH0014P Soldering Cartridge is a 30-degree Chisel tip. It is 1.4mm x 6.0mm and has optimized geometry for best thermal performa...
View full details$43.50| /Sale -
$46.60| /
metcal-cvc-8bv6005a-cv-5200-series-soldering-cartridge
MetcalThe Metcal OK-CVC-8BV6005A Solder Cartridge is a Long Reach Access Bevel, 60-degree, 0.5mm X 14mm for use with the CV-5210 Connection Validation...
View full details$46.60| /Sale -
$35.30| /
metcal-cvc-7bv6005a-cv-5200-series-soldering-cartridge
MetcalThe Metcal OK-CVC-7BV6005A Solder Cartridge is a Long Reach Access Bevel, 60-degree, 0.5mm X 14mm for use with the CV-5210 Connection Validation...
View full details$35.30| /Sale -
$37.60| /
metcal-uftc-7chl08-ultrafine-long-chisel-soldering-tip-for-the-mx-h2-uf-hand-piece-0-8mm-x-9mm
MetcalThe Metcal UFTC-7CHL08 UltraFine™ Soldering Tip are only for use with the MX-H2-UF UltraFine™ soldering handpiece. Metcal UFTC-7CHL08 Features:...
View full details$37.60| /Sale -
$26.80| /
metcal-ssc-717a-extra-large-chisel-soldering-cartridge-tip
MetcalThe Metcal SSC-717A Soldering Tip Cartridge have a high power coil assembly that delivers additional power to demanding solder joints, without t...
View full details$26.80| /Sale -
$20.20| /
metcal-ssc-745a-conical-sharp-cartridge-tip
MetcalThe Metcal SSC-745A Soldering Tip Cartridges have a high power coil assembly that delivers additional power to demanding solder joints, without ...
View full details$20.20| /Sale -
$30.80| /
metcal-sttc-845-bevel-tip-1-128-for-mx-series-systems
MetcalThe Metcal STTC-845 Bevel Tip 1/128" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Soldering Iron H...
View full details$30.80| /Sale -
$33.30| /
metcal-sttc-825-chisel-tip-1-32-for-mx-series-systems
MetcalThe Metcal STTC-825 Chisel Tip 1/32" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Soldering Iron H...
View full details$33.30| /Sale -
$29.60| /
metcal-sttc-199-chisel-bent-tip-3-64-for-mx-series-systems
MetcalThe Metcal STTC-199 Chisel Bent Tip 3/64" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Soldering I...
View full details$29.60| /Sale -
$34.50| /
metcal-sttc-143-conical-sharp-soldering-cartridge-tip
MetcalThe Metcal STTC-143 Conical Sharp Tips provide a wide range of options for through-hole and SMD Rework. For use with the MX-500 and MX-5000 &...
View full details$34.50| /Sale -
$34.50| /
metcal-sttc-142-chisel-soldering-cartridge-tip
MetcalThe Metcal STTC-142 Long Reach Chisel Soldering Cartridge Tips provide a wide range of options for through-hole and SMD Rework. For use with the...
View full details$34.50| /Sale -
$47.20| /
metcal-sttc-141-conical-chisel-tip-1-64-for-mx-series-systems
MetcalThe Metcal STTC-141 Conical Chisel Tip 1/64" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Solderi...
View full details$47.20| /Sale -
$30.80| /
metcal-sttc-101-conical-soldering-cartridge-tip
MetcalThe Metcal STTC-101 Conical Soldering Cartridge Tips provide a wide range of options for through-hole and SMD Rework. For use with the MX-500 an...
View full details$30.80| /Sale -
$51.30| /
metcal-sttc-098-chisel-bent-soldering-cartridge-tip
MetcalThe Metcal STTC-098 Chisel Bent Tips provide a wide range of options for through-hole and SMD Rework. For use with the MX-500 and MX-5000 & ...
View full details$51.30| /Sale -
$30.80| /
metcal-sttc-045-bevel-tip-1-128-for-mx-series-systems
MetcalThe Metcal STTC-045 Bevel Tip 1/128" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Soldering Iron H...
View full details$30.80| /Sale -
$29.60| /
metcal-sttc-026-sharp-bent-tip-016-for-mx-series-systems
MetcalThe Metcal STTC-026 Sharp Bent Tip .016" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Soldering Ir...
View full details$29.60| /Sale -
$30.80| /
metcal-sttc-022-conical-sharp-soldering-cartridge-tip
MetcalThe Metcal STTC-022 Conical Sharp Tips provide a wide range of options for through-hole and SMD Rework. For use with the MX-500 and MX-5000 &...
View full details$30.80| /Sale -
$58.90| /
metcal-smtc-1167-hoof-soldering-cartridge-tip
MetcalThe Metcal SMTC-1167 Hoof Soldering Tips are for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for cond...
View full details$58.90| /Sale -
$13.30| /
metcal-scv-ch25-chisel-solder-tip-2-5mm-10-for-metcal-mfr-units-and-ps-900-stations
MetcalThe Metcal SCV-CH25 Chisel Solder Tip is used in the popular MFR-1120 and the MFR-2220 Rework Systems. The SCV-CH25 offers SmartHeat® Technology...
View full details$13.30| /Sale -
$32.20| /
metcal-cvc-7bv6018r-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7BV6018R Soldering Cartridge is a long reach, 60-degree bevel cartridge. It is 1.78mm x 14.2mmConnection Valiation Enabled700 Se...
View full details$32.20| /Sale -
$43.50| /
metcal-cvc-7bv6018p-cv-5200-series-soldering-cartridge
MetcalThe Metcal CVC-7BV6018P is a Soldering Cartridge for the CV-5200 Connection Validation Soldering Station. This is 1.8mm x 6mm Beveled 60 degree...
View full details$43.50| /Sale -
$111.00| /
metcal-smtc-161-blade-rework-cartridge-tip
MetcalThe Metcal SMTC-161 Blade Rework Cartridge Tips are for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces f...
View full details$111.00| /Sale -
$13.30| /
metcal-sfv-ch50a-chisel-soldering-tip
MetcalThe Metcal SFV-CH50A Chisel Soldering Tips are for use with the soldering tip hand-piece of the PS and MFR Platforms. They are recommended for h...
View full details$13.30| /Sale -
$19.60| /
metcal-scp-ch20-chisel-soldering-rework-cartridge-tip
MetcalThe Metcal SCP-CH20 cartridges are for use with the MFR-H1-SC2 soldering cartridge hand-piece of the MFR Single and Dual Platforms (MFR-1100 and...
View full details$19.60| /Sale -
$13.30| /
metcal-sfv-ch15ar-chisel-soldering-tip
MetcalThe Metcal SFV-CH15AR Chisel Soldering tips are for use with the soldering tip hand-piece of the PS and MFR Platforms. They are recommended for ...
View full details$13.30| /Sale -
$13.30| /
metcal-sfv-ch25-chisel-soldering-tip
MetcalThe Metcal SFV-CH25 Chisel Solder Tip are for use with the soldering tip hand-piece of the PS and MFR Platforms. They are recommended for heavy ...
View full details$13.30| /Sale -
$37.60| /
metcal-uftc-7ch06-ultrafine-chisel-soldering-tip-for-the-mx-h2-uf-hand-piece-0-6mm-x-5-1mm
MetcalThe Metcal UFTC-7CH06 UltraFine™ Soldering Tip are only for use with the MX-H2-UF UltraFine™ soldering handpiece. Metcal UFTC-7CH06 Features: ...
View full details$37.60| /Sale -
$30.80| /
metcal-sttc-899-chisel-bent-tip-3-64-for-mx-series-systems
MetcalThe Metcal STTC-899 Chisel Bent Tip 3/64" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Soldering I...
View full details$30.80| /Sale -
$30.80| /
metcal-sttc-847-bevel-tip-1-32-for-mx-series-systems
MetcalThe Metcal STTC-847 Bevel Tip 1/32" tips are for use with the MX-H1-AV Advanced™ ergonomically Soldering Iron and the MX-RM3E Soldering Iron Ha...
View full details$30.80| /Sale