• Send Us a Message
  • Skip to content


    SKU D-19651


    Satisfaction Guarantee

    • Single Workstation Continuous Monitor
      Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface

    • IMPROVED Operator Alarm
      Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and monitor’s jack is intermittent

    • NEW Mat Monitor Switch
      Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface

    • NEW Audible Alarm Adjustment
      Sets the audible alarm volume from loud to louder

    • NEW 19653 Remote Alarm Accessory
      Connect to the Multi-Mount Monitor and place in the operator’s field of view to alert operator of alarms

    • Desco Wave Distortion Technology
      Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor

    • Park Snap
      Allows the operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm

    • Single-Wire Impedance Design
      Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0

    • 1.2 Volt Operator Test Voltage
      Reduces the risk of electrical overstress (EOS) for the handling of sensitive components

    • <50 Millisecond Alarm Response Time
      Identifies failures and intermittencies that inferior technologies miss

    • Continuous Visual and Audible Alarms
      Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs

    • Calibration Verification
      Use the Desco 98229 Monitor Calibration Unit to check the test limits of Wave Distortion Monitors without removing them from their workstations

    • NIST Calibrated with Certificate Included
      Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.

    • 100-240VAC Power Adapter with North American Plug
      Works with standard electrical systems in North America, Japan and Asia

    • Made in the United States of America

    • This is the suggested replacement for the Desco 19229